Paint Defects
Silking
Description
Evident in metallics when all the aluminium particles tent to run the one way. Encountered mostly on vertical surfaces where the weight of the aluminium "drops" through the applied coat.
Cause
- Applying metallics too heavily almost to the run and sag stage
- Wrong thinning reduction
- Wrong gun adjustment and technique
- Insufficient time between coats
Prevention
- Do not apply in heavy wet coats
- Use recommended thinning ratios
- Use good spray techniques i.e. gun held at right angles 15-20cm from job with a constant gun speed over complete area.
- Allow recommended flash times between coats
Rectification
If silking has already occurred, sand with fine paper and refinish